Iron-A-Way IAW42NDU Fiche technique

Naviguer en ligne ou télécharger Fiche technique pour Non Iron-A-Way IAW42NDU. Iron-A-Way IAW42NDU Specification Sheet Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Specifications | February 2015
Product Model Numbers
Ironing Centers: IAW-42
Dimensions (Actual Size)
Overall height: 51”
Overall width: 14 1/2
Overall depth including door: 3 3/4
Dimension from wall to outer
Edge of frame (when recessed): Flush
Penetration into opening: 3
Rough opening height: 51
Rough opening width: 14 1/2
Wall opening depth: 3 7/8”
Additional Information
Unit may be surface mounted (extends into
the room 3 3/4”) or can be recessed (door
only extends into room for a flush mount) into
any wall with standard 16” center studs.
See table bottom right to determine desired
ironing board height above the floor.
Unit can be provided with a left piano hinge
door upon request. Right hinge is standard.
For flush mount special hinges are required.
Comes standard with wood veneer door.
Recessed mounting - Recommended to
attach 2” x 4” cleat to studs, level with the
bottom of opening (for support.)
Door opens approximately 180°. Allow at
least 16” to the side of the unit for door to
swing open.
Options include: flat white door, no door,
sleeveboard, special hinges (recess
applications), and iron.
See Page 2 for additional information
Ironing Board Height
Surface Mount
or
Recessed
Cut Opening Board
Above floor Height
28 35
27” 34”
26 33
25 32
24 31
23 30
22 29
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Additional Information

Specifications | February 2015 Product Model Numbers Ironing Centers: IAW-42 Dimensions (Actual Size) Overall height: 51” Ov

Page 2 - Product Model IAW-42

Specifications | February 2015 Page 2 Product Model IAW-42 Additional Information Measurements when board is lowered (Not to

Commentaires sur ces manuels

Pas de commentaire